Users browsing this forum: No registered users and 21 guests
| |||||
Moderators: WR 1mposter, The Swede, Megaman, danr55, WR1 Bro, Moderators
Looking tideeeeeeee
The WR1 be safe in the knowledge that, short of strapping yourself to an Acme rocket, there's no quicker way to get from A to B.
Looking nice mate, nice and clean. If I was being over picky I would say the rear is looking abit too busy and the WR1 decals on the wings have been put on the wrong sides; the 'swoosh' should be facing backwards. Like I said I was just being picky.
Previously:
Subaru Impreza WRX (P95 CJH) Subaru Impreza WRX (DV52 LJZ) Subaru Impreza WRX STI WR1#131(VE04 LUW) Subaru Impreza STI Hawkeye Spec C (YD06 NGT) Subaru Impreza 22B #377 (S22BHU) Now: Subaru Impreza STI Hawkeye Spec C Type RA
yeh I noticed the decals were different from other folks , not sure what to do about the boot , , I was in the local Subaru garage the other day and watched them take badges off a new shape STI , looked kind of weird but might go for it do you know where I could get wr1 decals and then I could swap them round
Quite sure you can order the decals from the main dealer.
Also with the boot, just need a hot air gun/hair dryer and some 'sticky stuff' remover from Halfords. Have a look in my garage number 131. I'm not the best at things like this but I managed it okay. Previously:
Subaru Impreza WRX (P95 CJH) Subaru Impreza WRX (DV52 LJZ) Subaru Impreza WRX STI WR1#131(VE04 LUW) Subaru Impreza STI Hawkeye Spec C (YD06 NGT) Subaru Impreza 22B #377 (S22BHU) Now: Subaru Impreza STI Hawkeye Spec C Type RA
yeh cheers il try get some from the dealer ,, just had a look and ur boot looks very nice mate , it does make a difference ,
Tidy Car mate ... bet your well happy
Just needs De tango now .. and set of coilover's.. And tints maybe Then 400 bhp .. =-)
Is it just the indicator bulbs I change or do I need new headlights
This will help and is quite easy .. as i did mine http://bbs.scoobynet.com/technical-topi ... ights.html
Bril link rocko, gonna have a go with mine, sounds straight forward enough, what could go wrong......
cheers Rocko Im on it
looks lovely and familiar.... forgot about those brakes they look good the floating front bells.
i am guilty about the wr1 sticker on the boot Gracing the drive.....BMW M3 E92 with all the toys!/Integra DC5/ Integra DC2 race car/BMW X5
gone...Impreza RB320 No 112 gone...Impreza WR1 No 84 gone...Civic Type R EP3 gone...Seat Leon Cupra 225 gone...Civic Type R EP3 gone...(shed with weels)
its pretty darn easy to do, just go slowly and be careful not to put too much force on the headlight unit when removing it, those white plastic brackets can snap. I would use a heat gun rather than a fan heater, as this gives you far much more control over where you need the heat, and ofcourse not getting your hands in the way. All you need to do is to gently warm up the mastic and they prise apart pretty easy...just make sure you have ALL the screws out first.
its getting there mate , Ive ordered new wr1 decals so I can get them on the correct way round , next job is to get the roof Resprayed the indicators done
mate , got new WR1 decals from Scooby parts today ,, as you pointed out they were put on the wrong way round , so the nice guy from Scooby Parts made new ones for me only problem is when I try and take off the old ones , the glue sometimes can mark the paint , as the glue bites into the top coat , I also started to take off the WR1 sticker from the boot but was worried about the marks it would leave behind , Did you take your,s off and did the glue just come off ok
Just to add the wing decals are also in the wrong place they should be just in front of the indicators not below as on yours, It would have been a shame if you fit the new ones the correct way round and then discovered they were in the wrong place, so thought I would point it out.
Ant,
Had an my99 uk classic, Then got P1 (0329), Then got a brand new WR1 (092), Then got a my00 UK Classic, Then got another P1 (0488), Now Sold.
yeh cheers mate , I noticed that ,, thats why I wanted to make sure there would be no marks left , as they will be put in a different place , to the side if the indicators , not under them ,, cheers
ok so I got myself some new nuts , and got new wr1 decals , nut after I took the old ones off and gave her a polish , I think it looks good without the WR1 decals at all , some thoughts please as I have the new ones ready to go on
Looks great as you say but the decals just set it off nicely, they are small enough to be tasteful but not in your face. Just put new WR1 decals on mine along with the ones for the doors, so much better. Nice pics Graham
| ||
Who is onlineUsers browsing this forum: No registered users and 21 guests |
||