Need a favour!

by **hightower** » Wed Sep 24, 2008 10:43 am

i am getting different answers from different subaru dealers and starting to get :oops:

can anyone tell me what alloys are on there wr1 as i am sure it has to be an 8J fitting but been told both by subaru eg a 7.5 will fit but not so sure and dont want to order them and they dont fit
and also this says that the wr1 was a 7.5
http://www.supercarsite.net/subaru/impr ... i-wr1/2004
as not convinced with this web site as says the wr1 has a 2.5 turbo engine
want to get a new set before i go back offshore but getting :roll:

by **Designerman** » Wed Sep 24, 2008 10:35 pm

As far as I know the standard STI on which the WR1 is based had 7.5" x 17" wheels. The WR1 has 8" x 18" wheels.

The main problem is getting wheels that will clear the Brembo calipers. Also the correct offset is more important than actual wheel width.

Have a look at Scoobyworld's or Revolution's websites.

by **WAYNE WRX** » Wed Sep 24, 2008 10:58 pm

As above
WR1 (PFF7 ) wheels defo 8J x 18" 51 offset


	Board index ‹ Technical, Tuning, Modifications and Car Care ‹ Tech Help Change font size Print view


	Author Message Need a favour! by hightower » Wed Sep 24, 2008 10:43 am i am getting different answers from different subaru dealers and starting to get can anyone tell me what alloys are on there wr1 as i am sure it has to be an 8J fitting but been told both by subaru eg a 7.5 will fit but not so sure and dont want to order them and they dont fit and also this says that the wr1 was a 7.5 http://www.supercarsite.net/subaru/impr ... i-wr1/2004 as not convinced with this web site as says the wr1 has a 2.5 turbo engine want to get a new set before i go back offshore but getting Gracing the drive.....BMW M3 E92 with all the toys!/Integra DC5/ Integra DC2 race car/BMW X5 gone...Impreza RB320 No 112 gone...Impreza WR1 No 84 gone...Civic Type R EP3 gone...Seat Leon Cupra 225 gone...Civic Type R EP3 gone...(shed with weels) hightower Posts: 743 Joined: Mon Aug 06, 2007 11:29 pm Location: Stirling Top by Designerman » Wed Sep 24, 2008 10:35 pm As far as I know the standard STI on which the WR1 is based had 7.5" x 17" wheels. The WR1 has 8" x 18" wheels. The main problem is getting wheels that will clear the Brembo calipers. Also the correct offset is more important than actual wheel width. Have a look at Scoobyworld's or Revolution's websites. Designerman Posts: 222 Joined: Fri Jan 26, 2007 12:12 am Location: Top Secret Top by WAYNE WRX » Wed Sep 24, 2008 10:58 pm As above WR1 (PFF7 ) wheels defo 8J x 18" 51 offset www.wwjpc.co.uk Wales "n" West Japanese Performance Cars WR1 495 WAYNE WRX Posts: 294 Joined: Fri Sep 12, 2008 10:42 pm Location: Mid Wales Website Top


	Who is online Users browsing this forum: No registered users and 19 guests

Need a favour!

Need a favour!

Who is online