Are WR1 wing panels the same as the STi?

[Scooby_simon]

Just got the car back from the shop that fixed a dent in the wing. They have done a piss poor job if fixing it. The door crease line does not continue onto the wing panel (it's curved on the wing with no actual crease), I cannot believe they have hammered the old one back out. Are there differences between the WR1 wing panels and the STi's ????

Feckin Uber fecked off.....

[marky mark]

No, they are identical to a MY04 STi.

[Scooby_simon]

No, they are identical to a MY04 STi.

OK, thanks, guess they have tried to hammer it out and not made it work properly.

[WR1 Bro]

That is bad form!

[Scooby_simon]

That is bad form!

very fecked off about this.

fairly minor crunch in the station car park.

Took them a week to fix it. panel is wrong paint is not 100% right and they have managed to feck one of the alarm sensors inside the car and dent the rear near side panel behid the rear passagger window...

I'll be going a little postal on Monday

[WR1 Bro]

Paint will be VERY hard to match without blending in down the side of the car.

We had a nasty car park dink on one door which I chose to have just the door painted as the car was fairly new. I can see the colour difference at certain angles and it makes me really mad.

[Scooby_simon]

Paint will be VERY hard to match without blending in down the side of the car.

We had a nasty car park dink on one door which I chose to have just the door painted as the car was fairly new. I can see the colour difference at certain angles and it makes me really mad.

Colour looks fairly good. Bit there are a couple of pin holes in it. Looks like they did not bother to make sure it was smooth before they laquered it.

[WR1 Bro]

Surely to get the colour right is harder than matching the lines of the panels.... Why do people not understand that any work you have done on your car must be perfect? WNAKERS

[Scooby_simon]

Exactly....

[Azyman]

Surely to get the colour right is harder than matching the lines of the panels.... Why do people not understand that any work you have done on your car must be perfect? WNAKERS

sadley we are in a that will do society

simon your the fella who lives in hitchin am i right ? if so Quembys done some work on mine, well they send it out to a garage in Arlesey they do a good job take it to them and get there opiniun

[Scooby_simon]

Surely to get the colour right is harder than matching the lines of the panels.... Why do people not understand that any work you have done on your car must be perfect? WNAKERS

sadley we are in a that will do society

simon your the fella who lives in hitchin am i right ? if so Quembys done some work on mine, well they send it out to a garage in Arlesey they do a good job take it to them and get there opiniun

Not a bad idea.

Will see what Subaru insured say on Monday when I go postal at them.

Might pop up to them Saturday AM.