Login    Register

standard ride height

Ask your technical questions here.

Moderators: WR 1mposter, The Swede, Megaman, danr55, WR1 Bro

  • Author
    Message

standard ride height

Postby silver-sonic » Mon May 05, 2014 5:50 pm

hi what is standard ride height on the wr1?
i have bc coilovers fitted and looks way too much arch showing.
they measure approx 110mm from top of rim to arch .
what is it on a standard anyone?
Image
Image
silver-sonic
 
Posts: 289
Joined: Tue Jan 21, 2014 6:17 pm
Location: wakey

Re: standard ride height

Postby Gary75 » Tue May 06, 2014 7:14 am

Ride height is measured from the centre of the wheel to the lower lip of the wheel arch. Did you not take any measurements from the standard set up before fitting the coils? :bang:

That looks a good 25mm over standard to me..... Are you going cross country :D

I have standard fitted.

Back 14 inches ( 355 mm )
Front 14 inches ( 355 mm )

Hope this helps
Gary75
 
Posts: 777
Joined: Fri Apr 13, 2012 4:45 pm

Re: standard ride height

Postby silver-sonic » Tue May 06, 2014 8:53 pm

coilovers were on car when i bought it . so no idea what it was before!
will measure to centre now then.
just found it easier to measure to 2 definate edges for picture .
cheers.
silver-sonic
 
Posts: 289
Joined: Tue Jan 21, 2014 6:17 pm
Location: wakey

Re: standard ride height

Postby silver-sonic » Wed May 07, 2014 11:05 am

diameter of alloy is 498mm.
divided by 2 equals 249mm plus 115mm 365mm.
so only 10 mm high?
looks more.
silver-sonic
 
Posts: 289
Joined: Tue Jan 21, 2014 6:17 pm
Location: wakey

Return to Tech Help

Who is online

Users browsing this forum: No registered users and 10 guests

cron