Login    Register

WR1 emissions failure

Ask your technical questions here.

Moderators: WR 1mposter, The Swede, Megaman, danr55, WR1 Bro

  • Author
    Message

WR1 emissions failure

Postby Sprout » Thu Nov 05, 2009 5:39 pm

Looking for advice/help - I was told my WR1 was totally standard, but failed the MOT today on emissions - the garage say it has been de-catted, hence the failure. Is there any way of passing the MOT other than having to buy a new exhaust system with a cat??

Thanks in advance
Sprout
 
Posts: 7
Joined: Tue Jun 23, 2009 1:37 pm
Location: United Kingdom

Postby Gee Wr1 » Thu Nov 05, 2009 6:07 pm

There is only one cat in the original wr1 system its in the downpipe, easy enough to check if its there yourself just open bonnet & look at the pipe coming from the back of the turbo. If the cat is still in place you should see this
Image
The white heatproof material you see is covering the cat.

If its not there did it fail by much? There are additives you can put in your fuel that will reduce emissions a bit like Millers Eco Max, but if it was way over then that won't help much.
User avatar
Gee Wr1
 
Posts: 1965
Joined: Thu Sep 30, 2004 6:29 pm
Location: The original Highlands Wr1

Postby Sprout » Thu Nov 05, 2009 7:47 pm

Cheers - not sure by how much it failed by. Assuming I need a replacement, anyone recommend an aftermarket down pipe with sports cat?? Subaru quoted £580 from them!!
Sprout
 
Posts: 7
Joined: Tue Jun 23, 2009 1:37 pm
Location: United Kingdom

Postby rocko » Thu Nov 05, 2009 7:55 pm

Scooby world do a 100 cell cat

But If i was you GO De cat A nice 3" full system

RCM Or Miltek
User avatar
rocko
 
Posts: 560
Joined: Sun Sep 24, 2006 6:43 pm

Postby Sprout » Thu Nov 05, 2009 8:05 pm

rocko wrote:Scooby world do a 100 cell cat

But If i was you GO De cat A nice 3" full system

RCM Or Miltek


Thats the problem - it is de-cat apparently but failing the MOT because of it.
Sprout
 
Posts: 7
Joined: Tue Jun 23, 2009 1:37 pm
Location: United Kingdom

Postby John Mc » Thu Nov 05, 2009 9:07 pm

I am sure there are people who will pass it!! :wink:
[Just incase this gets lost in translation, I am not slandering you, I know people can be sensitive to these harsh words.]
John Mc
 
Posts: 3528
Joined: Thu May 22, 2008 3:15 pm
Location: Harrogate, N.Yorks

Postby Ant » Thu Nov 05, 2009 10:31 pm

Make sure there not just failing it because the second cat has been removed as this is removed when the ppp was fitted, ie make sure it is because the emissions are actually too high and not just that the second cat has been removed. The first thing to do as others state is to see if the first cat in the downpipe is fitted or not.
Ant,

Had an my99 uk classic,

Then got P1 (0329),

Then got a brand new WR1 (092),

Then got a my00 UK Classic,

Then got another P1 (0488), Now Sold.
User avatar
Ant
 
Posts: 258
Joined: Sun Sep 19, 2004 10:49 am
Location: Kent

Postby asperformance » Fri Nov 06, 2009 10:44 am

the problem with most sports cat is that they need to be HOT................

never had any issues with a pukka Prodrive sports cat and emissions, but have had various problems with the cheap 100CEL ones
ASPerformance
PFC BRAKES, PAGID, MOTUL, FERODO, BREMBO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA
online shop!!
asperformance
 
Posts: 587
Joined: Wed Jun 24, 2009 10:40 am
Location: north east

Postby WUZ » Sat Nov 07, 2009 10:24 am

Toattly agree with Alyn above. Prodrive Sportscat will not be an issue if it is HOT.

Take it for a HARD run then drop it off to the MOT guys and test it then....... should be fine :)
WUZ
 
Posts: 71
Joined: Thu Jun 25, 2009 4:45 pm

Postby The Swede » Sat Nov 07, 2009 10:59 am

I don't see what the issue is with de-cat. Half the scoobs and Evo drive around without cat.

You don't need another cat, you need another MOT station.

Also, the car doesn't really need to fail the MOT test because of the decat. Some cars, if they run well, will get low enough emissions to pass the test without cat.
Image
User avatar
The Swede
Moderator
 
Posts: 9153
Joined: Sat May 07, 2005 12:55 pm
Location: Azerbaijan

Postby Foley » Sat Nov 07, 2009 6:55 pm

Mines failed with the prodrive sports cat,

The mot tester took it a good run and pass no probs when hot,
Focus ST's rule!!!
User avatar
Foley
Moderator
 
Posts: 1517
Joined: Wed Feb 25, 2009 11:27 pm

Postby WR 1mposter » Sun Nov 08, 2009 5:08 pm

The Swede wrote:I don't see what the issue is with de-cat. Half the scoobs and Evo drive around without cat.

You don't need another cat, you need another MOT station.

Also, the car doesn't really need to fail the MOT test because of the decat. Some cars, if they run well, will get low enough emissions to pass the test without cat.


Our car failed on emission's last time round ....just !

no cat fitted either I suspect a good blast before it would pass :lol:
2007 BMW M5
2004 Petter Solberg STi
User avatar
WR 1mposter
 
Posts: 14095
Joined: Mon Jun 27, 2005 12:04 am
Location: Sunny Falmouth

Postby WUZ » Sun Nov 08, 2009 6:59 pm

Sorry for asking but how will taking a DECAT WR1 for a good blast prior to the MOT test make it pass emissions.............................. :?:
WUZ
 
Posts: 71
Joined: Thu Jun 25, 2009 4:45 pm

Postby Megaman » Sun Nov 08, 2009 7:27 pm

Foley wrote:Mines failed with the prodrive sports cat,

The mot tester took it a good run and pass no probs when hot,


Not sure i like the sound of the mot tester taking my car out for a spin on hos own... :shock:
Image
User avatar
Megaman
Fords Number 1 Fan
 
Posts: 4206
Joined: Wed Feb 27, 2008 11:40 pm
Location: Leeds

Postby Foley » Sun Nov 08, 2009 7:57 pm

Megaman wrote:
Foley wrote:Mines failed with the prodrive sports cat,

The mot tester took it a good run and pass no probs when hot,


Not sure i like the sound of the mot tester taking my car out for a spin on hos own... :shock:


Yer he probs kicked it's c*nt in :lol: Was probs fine and that was an excuse to take the wr1 a spin,

Well thats what i would do if i had someone elses car lol
Focus ST's rule!!!
User avatar
Foley
Moderator
 
Posts: 1517
Joined: Wed Feb 25, 2009 11:27 pm

Return to Tech Help

Who is online

Users browsing this forum: No registered users and 11 guests

cron