PCD of the WR1

by **500tie** » Tue Jan 06, 2009 4:22 pm

Does anybody know what the pcd of the WR1 is im unsure if its 5x100 or 5x114

Your help would be grately apreciated
thanks

by **Gee Wr1** » Tue Jan 06, 2009 4:44 pm

It's the 5x100 for wr1.
114 was hawkeye sti onwards but i think the hawkeye wrx's are still 100.

by **500tie** » Tue Jan 06, 2009 4:46 pm

nice one thanks mate

by **Azyman** » Tue Jan 06, 2009 7:23 pm

500tie wrote:Does anybody know what the pcd of the WR1 is im unsure if its 5x100 or 5x114

Your help would be grately apreciated
thanks

silly question whats pcd

by **marky mark** » Tue Jan 06, 2009 7:30 pm

Pitch Circle Diameter

I.e 5 X 100 means it has 5 holes, equi-distantly spaced, drilled on an effective diameter of 100mm.

360/5 = 72, so in this case there are 5 holes, 72 degrees apart, drilled on a 100mm diameter circle.

PCD of the WR1

PCD of the WR1

Re: PCD of the WR1

Who is online


	Board index ‹ Technical, Tuning, Modifications and Car Care ‹ Tech Help Change font size Print view


	Author Message PCD of the WR1 by 500tie » Tue Jan 06, 2009 4:22 pm Does anybody know what the pcd of the WR1 is im unsure if its 5x100 or 5x114 Your help would be grately apreciated thanks Sooty, Needs a WR1 now his WRX300 is sold Or a spec D 500tie Posts: 198 Joined: Sat Jan 03, 2009 4:30 pm Location: Lyneham, Wilts Top by Gee Wr1 » Tue Jan 06, 2009 4:44 pm It's the 5x100 for wr1. 114 was hawkeye sti onwards but i think the hawkeye wrx's are still 100. Gee Wr1 Posts: 1965 Joined: Thu Sep 30, 2004 6:29 pm Location: The original Highlands Wr1 Top by 500tie » Tue Jan 06, 2009 4:46 pm nice one thanks mate Sooty, Needs a WR1 now his WRX300 is sold Or a spec D 500tie Posts: 198 Joined: Sat Jan 03, 2009 4:30 pm Location: Lyneham, Wilts Top Re: PCD of the WR1 by Azyman » Tue Jan 06, 2009 7:23 pm 500tie wrote:Does anybody know what the pcd of the WR1 is im unsure if its 5x100 or 5x114 Your help would be grately apreciated thanks silly question whats pcd Regs Geoff Azyman Posts: 661 Joined: Tue Jan 09, 2007 8:30 pm Location: Hertfordshire Top by marky mark » Tue Jan 06, 2009 7:30 pm Pitch Circle Diameter I.e 5 X 100 means it has 5 holes, equi-distantly spaced, drilled on an effective diameter of 100mm. 360/5 = 72, so in this case there are 5 holes, 72 degrees apart, drilled on a 100mm diameter circle. If JP is Roland Rat, them I am Errol the Hamster... His number 1 fan. marky mark JPs little helper Posts: 4910 Joined: Mon Oct 10, 2005 9:23 pm Location: PMSL @ BOBFOC Website Top


	Who is online Users browsing this forum: No registered users and 50 guests