Page 1 of 1

326mm brembo vented discs and brembo pads

PostPosted: Sun Jan 20, 2013 9:52 pm
by Dayo
326mm brembo vented discs and brembo pads, they have been on my wr1 for less than 1k miles and i have decided to remove them and uprated to drilled and grooved as im going to do some track days.

They cost me £350 approx 2 month ago, looking for around £250ono.

Located in boston, lincolnshire.

Thanks

Re: 326mm brembo vented discs and brembo pads

PostPosted: Mon Jan 21, 2013 9:07 am
by Dayo
Bumppppp

Re: 326mm brembo vented discs and brembo pads

PostPosted: Tue Jan 29, 2013 7:12 am
by delrodney
Hi
Are these still available?
Are you selling front and rear?

Thanks

Re: 326mm brembo vented discs and brembo pads

PostPosted: Tue Jan 29, 2013 7:37 am
by simon.r
As above,

Re: 326mm brembo vented discs and brembo pads

PostPosted: Tue Jan 29, 2013 8:48 am
by Dayo
Yes there still available, only the front im afraid as the rears have never been changed.

The only reason im selling is because iv decided to take it on a few track days so im going to upgrade to aftermarkets :)

Re: 326mm brembo vented discs and brembo pads

PostPosted: Tue Jan 29, 2013 8:56 am
by delrodney
are they still on the car, or have you already replaced them with an upgrade?

Re: 326mm brembo vented discs and brembo pads

PostPosted: Tue Jan 29, 2013 9:03 am
by Dayo
They are currently on the car and will be coming off saturday for definate as i ordered my new discs yesterday :) i have the genuine brembo pads with them aswell which was put on at the same time.

Re: 326mm brembo vented discs and brembo pads

PostPosted: Tue Jan 29, 2013 11:30 am
by simon.r
What aftermarket discs are you going for?

Got the original receipt?

Could be very interested.

Cheers

SImon

Re: 326mm brembo vented discs and brembo pads

PostPosted: Tue Jan 29, 2013 11:39 am
by Dayo
I thinking of going for godspeed brakes.

I should have it somewhere, i got them from asperformance on here.

Re: 326mm brembo vented discs and brembo pads

PostPosted: Thu Jan 31, 2013 9:58 am
by simon.r
Dayo

When these are off get some pictures up please.

Champion.

Simon

Re: 326mm brembo vented discs and brembo pads

PostPosted: Thu Jan 31, 2013 10:07 am
by Dayo
I dont think im going to have time to remove them this weekend, but i can take some close ups of them on the car if thats any good to you?