Login    Register

Invisible Touch Detailing -Mini Cooper S 'The Ultimate Mini'

Share your car cleaning and general car care tips with everyone in here.

Moderators: WR 1mposter, The Swede, Megaman, danr55, WR1 Bro, Moderators

  • Author
    Message

Invisible Touch Detailing -Mini Cooper S 'The Ultimate Mini'

Postby InvisibleTouchDetailing » Fri Feb 25, 2011 12:04 pm

Hi,
Here we have a Mini Cooper S, known by the owner as ‘The Ultimate Mini’ in for paint correction plus engine bay treatment.

This special Mini had various upgraded parts fitted including, Eibach lowering springs, H&R anti roll bars all round, AP Racing front brake conversion and upgraded rear disks, performance racing decats, quad exhaust system, leather OMP bucket seats and harnesses, carbon exterior pieces, alloys and a stage 2 conversion by Mini Speed which included a modified intake, different sized pulley on the super charger and finally a remap.

Lets first have a walk around the car.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

The car had been used for various track day events in the past and was showing various signs of abuse due to this.

So, starting off, the engine bay was rinsed down and everything was sprayed with Meguiars APC and Engine & Machine Cleaner, then agitated with various brushes. This was then rinsed off.

Image

Image

Image

Image

Image

The car was then jet washed, snow foamed, left to dwell for 5 mins and then jet washed again.

Image

Image

All door, boot shuts and fuel cap were then sprayed in Meguiars APC, agitated with brushes and rinsed off.

Image

Image

Image

Image

Image

Image

The car was then washed using Meguiars Shampoo Plus using the 2 bucket method.
It was then brought inside. Whilst still wet the engine bay was sprayed with Aerospace 303 to treat all rubbers and plastics. This was then left to dry naturally, we’ll come back to the engine bay later.

Image

Now the car was clean it was easy to see there was a lot of contamination on the paint that required claying to remove.

Image

Image

Image

Image

Image

Image

Image

Image

After this the car was taken back outside to be washed again using the 2 bucket method and brought back inside to be dried.

Image

Next was to remove the alloys to give them a good clean, along with the arches being degreased. The alloys were cleaned with Bilberry wheel cleaner and agitated with brushes, clayed and 2 coats of Poorboys Wheel Sealant applied.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Once completed, the paintwork was inspected under halogen and LED lighting. The paint was very flat and oxidised in areas, lots of swirls and holograms. The car had apparently been previously machine polished at some point. The defect on the rear drivers wing looked as though it had been most likely caused by the rubber hose dragging on the paintwork during a previous tyre pressure check.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Lots of paint thickness readings were taken per panel.

Image

Image

I initially tried Menzerna 106FA on a Sonus Polishing pad using the Makita rotary. This made a huge difference to the finish but was not enough on close inspection.

Image

Image

Image

So I changed to Menzerna 3.02 with a Sonus cutting pad which although would need a refining polish to follow up with, gave much better correction results.

Image

Image

Image

Moving round the car, the lights were also corrected, as were the A pillars and carbon sections.

Image

Image

Image

Image

Image

Image

Image

The front bumper corrected after a previous respray.

Image

Image

After this the car was dusted down using Meguiars Last Touch and then refined using Meguiars 85RD with 3M finishing and spot finishing pads for the tighter areas.

Image

Image

Image

Image

The whole car was then given an IPA wipedown to remove polishing oils.

Image

With a nice deep solid red, I chose to apply Meguiars No.7 Show Car Glaze, leaving this.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Next, moving back to the engine bay, all painted areas were polished by hand.

Image

Image

Image

Image

Image

Moving onto the interior, this was given a good hoover and all plastics / pedals were cleaned with Meguiars APC.

Image

Image

Image

Image

Image

Image

Image

The seats being fairly new were wiped clean with a damp cloth and then treated with Gliptone Leather Conditioner.

Image

All exterior plastics and door seals were treated with Autoglym Bumper Care.

Image

The tyres were treated with 2 coats of Endurance Tyre Gel

Image

Image

Image

Track day harnesses placed back in the boot.

Image

The quad exhausts were cleaned with fine grade wire wool and Autosol and then refined with Meguiars NXT.

Image

Image

Image

Image

Image

Image

The rubber mats were cleaned with Meguiars APC, agitated with brushes, rinsed and dried off.

Image

Image

Image

Finally, 2 applications of Victoria Concourse Wax were applied to the paintwork.

Image

These were the final images

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Thanks for looking,
Christian
INVISIBLE TOUCH DETAILING
Automotive & Marine Detailing Treatments

Web: http://www.invisibletouchdetailing.co.uk
Email: christian@invisibletouchdetailing.co.uk
Phone: 07876 166 077
User avatar
InvisibleTouchDetailing
 
Posts: 81
Joined: Thu Sep 24, 2009 9:44 am
Location: Guildford

Postby WR1 Bro » Fri Feb 25, 2011 12:37 pm

I love these threads. Well done.
User avatar
WR1 Bro
Site Admin
 
Posts: 20279
Joined: Thu Aug 19, 2004 8:54 am
Location: If skinny, ugly and Scouse was best, then JohnMc would be a porn star legend.

Postby CAVEMAN » Fri Feb 25, 2011 12:40 pm

Even your place has undergone a facelift too....

all the horsey stuff has gone, and like the chequerboard flooring!!
CAVEMAN
 
Posts: 1130
Joined: Sun Mar 29, 2009 1:34 pm
Location: Seinajoki, Finland

Postby John Mc » Fri Feb 25, 2011 12:41 pm

Quality work mate, looks like the owner will be very pleased with what you have done!
John Mc
 
Posts: 3528
Joined: Thu May 22, 2008 3:15 pm
Location: Harrogate, N.Yorks

Postby InvisibleTouchDetailing » Fri Feb 25, 2011 12:54 pm

Thanks guys.

Certainly has Caveman. I moved house and therefore my work location fairly recently, has been a very busy time. This barn used to house young horses and has been converted into the new garage. Still a few bits and pieces to do inbetween work but its a huge improvement to what it was and is great to finally have a dedicated area :)
INVISIBLE TOUCH DETAILING
Automotive & Marine Detailing Treatments

Web: http://www.invisibletouchdetailing.co.uk
Email: christian@invisibletouchdetailing.co.uk
Phone: 07876 166 077
User avatar
InvisibleTouchDetailing
 
Posts: 81
Joined: Thu Sep 24, 2009 9:44 am
Location: Guildford

Postby Chris B » Fri Feb 25, 2011 8:09 pm

Top work,excellent job.
Heaven can wait....I'm playing with my scooby.
Chris B
 
Posts: 1729
Joined: Tue Sep 07, 2004 1:59 pm
Location: Leicestershire

Postby Scooby Si » Fri Feb 25, 2011 10:05 pm

Agree with Stu really enjoy these threads - what a transformation!
User avatar
Scooby Si
 
Posts: 77
Joined: Fri Sep 07, 2007 8:59 pm

Postby Cozzy 481 » Sat Feb 26, 2011 7:37 am

YOU MISSED A BIT!! :lol:
Lovely job Christian.
Photos now posted of your work on mine (Cozzy 481 in The Garage / And "A Winter Spruce Up" in Car Care) thanks for your hard work. :wink:
Dave
Bmw 320ci msport
Bmw 323i tour msport
Subaru Impreza wrx sti 03 (new)
wr1 481 (New)
Bmw 530i m sport (Champane Edition)
Shogun (06) SORRY
Bmw 330i m sport
Bought WR1 481 back.(SOLD)
Subaru Tribeca B9 SE7 2007.
Cozzy 481
 
Posts: 498
Joined: Sun Sep 12, 2010 7:11 am
Location: West Wickham Kent

Postby WR 1mposter » Sat Feb 26, 2011 11:45 am

top work !


shame i live in cornwall :roll:
2007 BMW M5
2004 Petter Solberg STi
User avatar
WR 1mposter
 
Posts: 14095
Joined: Mon Jun 27, 2005 12:04 am
Location: Sunny Falmouth

Postby NewSuboy » Sat Feb 26, 2011 7:44 pm

WR1 Bro wrote:I love these threads. Well done.


Me too they amaze me...really good job, looks like a different car.
UK TURBO...SOLD
P1 976.....SOLD
WR1 043.... SOLD
M3 CAB (E46) ..SOLD
EVO IX MR FQ-360 (running 410/430)
User avatar
NewSuboy
 
Posts: 263
Joined: Wed Mar 17, 2010 10:19 am
Location: West Midlands

Return to Car Care

Who is online

Users browsing this forum: No registered users and 10 guests

cron